Gemfile

@@ -3,7 +3,7 @@ git_source(:github) { |repo| "https://github.com/#{repo}.git" }
 
 ruby file: "./.ruby-version"
 
-gem "rails", "~> 7.2.0.rc1"
+gem "rails", "~> 7.1"
 gem "propshaft"
 gem "pg"
 gem "puma"

Gemfile.lock

@@ -7,76 +7,80 @@ GIT
 GEM
   remote: https://rubygems.org/
   specs:
-    actioncable (7.2.0.rc1)
-      actionpack (= 7.2.0.rc1)
-      activesupport (= 7.2.0.rc1)
+    actioncable (7.1.3.4)
+      actionpack (= 7.1.3.4)
+      activesupport (= 7.1.3.4)
       nio4r (~> 2.0)
       websocket-driver (>= 0.6.1)
       zeitwerk (~> 2.6)
-    actionmailbox (7.2.0.rc1)
-      actionpack (= 7.2.0.rc1)
-      activejob (= 7.2.0.rc1)
-      activerecord (= 7.2.0.rc1)
-      activestorage (= 7.2.0.rc1)
-      activesupport (= 7.2.0.rc1)
-      mail (>= 2.8.0)
-    actionmailer (7.2.0.rc1)
-      actionpack (= 7.2.0.rc1)
-      actionview (= 7.2.0.rc1)
-      activejob (= 7.2.0.rc1)
-      activesupport (= 7.2.0.rc1)
-      mail (>= 2.8.0)
+    actionmailbox (7.1.3.4)
+      actionpack (= 7.1.3.4)
+      activejob (= 7.1.3.4)
+      activerecord (= 7.1.3.4)
+      activestorage (= 7.1.3.4)
+      activesupport (= 7.1.3.4)
+      mail (>= 2.7.1)
+      net-imap
+      net-pop
+      net-smtp
+    actionmailer (7.1.3.4)
+      actionpack (= 7.1.3.4)
+      actionview (= 7.1.3.4)
+      activejob (= 7.1.3.4)
+      activesupport (= 7.1.3.4)
+      mail (~> 2.5, >= 2.5.4)
+      net-imap
+      net-pop
+      net-smtp
       rails-dom-testing (~> 2.2)
-    actionpack (7.2.0.rc1)
-      actionview (= 7.2.0.rc1)
-      activesupport (= 7.2.0.rc1)
+    actionpack (7.1.3.4)
+      actionview (= 7.1.3.4)
+      activesupport (= 7.1.3.4)
       nokogiri (>= 1.8.5)
       racc
-      rack (>= 2.2.4, < 3.2)
+      rack (>= 2.2.4)
       rack-session (>= 1.0.1)
       rack-test (>= 0.6.3)
       rails-dom-testing (~> 2.2)
       rails-html-sanitizer (~> 1.6)
-      useragent (~> 0.16)
-    actiontext (7.2.0.rc1)
-      actionpack (= 7.2.0.rc1)
-      activerecord (= 7.2.0.rc1)
-      activestorage (= 7.2.0.rc1)
-      activesupport (= 7.2.0.rc1)
+    actiontext (7.1.3.4)
+      actionpack (= 7.1.3.4)
+      activerecord (= 7.1.3.4)
+      activestorage (= 7.1.3.4)
+      activesupport (= 7.1.3.4)
       globalid (>= 0.6.0)
       nokogiri (>= 1.8.5)
-    actionview (7.2.0.rc1)
-      activesupport (= 7.2.0.rc1)
+    actionview (7.1.3.4)
+      activesupport (= 7.1.3.4)
       builder (~> 3.1)
       erubi (~> 1.11)
       rails-dom-testing (~> 2.2)
       rails-html-sanitizer (~> 1.6)
-    activejob (7.2.0.rc1)
-      activesupport (= 7.2.0.rc1)
+    activejob (7.1.3.4)
+      activesupport (= 7.1.3.4)
       globalid (>= 0.3.6)
-    activemodel (7.2.0.rc1)
-      activesupport (= 7.2.0.rc1)
-    activerecord (7.2.0.rc1)
-      activemodel (= 7.2.0.rc1)
-      activesupport (= 7.2.0.rc1)
+    activemodel (7.1.3.4)
+      activesupport (= 7.1.3.4)
+    activerecord (7.1.3.4)
+      activemodel (= 7.1.3.4)
+      activesupport (= 7.1.3.4)
       timeout (>= 0.4.0)
-    activestorage (7.2.0.rc1)
-      actionpack (= 7.2.0.rc1)
-      activejob (= 7.2.0.rc1)
-      activerecord (= 7.2.0.rc1)
-      activesupport (= 7.2.0.rc1)
+    activestorage (7.1.3.4)
+      actionpack (= 7.1.3.4)
+      activejob (= 7.1.3.4)
+      activerecord (= 7.1.3.4)
+      activesupport (= 7.1.3.4)
       marcel (~> 1.0)
-    activesupport (7.2.0.rc1)
+    activesupport (7.1.3.4)
       base64
       bigdecimal
-      concurrent-ruby (~> 1.0, >= 1.3.1)
+      concurrent-ruby (~> 1.0, >= 1.0.2)
       connection_pool (>= 2.2.5)
       drb
       i18n (>= 1.6, < 2)
-      logger (>= 1.4.2)
       minitest (>= 5.1)
-      securerandom (>= 0.3)
-      tzinfo (~> 2.0, >= 2.0.5)
+      mutex_m
+      tzinfo (~> 2.0)
     addressable (2.8.7)
       public_suffix (>= 2.0.2, < 7.0)
     base64 (0.2.0)
@@ -151,6 +155,7 @@ GEM
     mini_mime (1.1.5)
     minitest (5.24.1)
     msgpack (1.7.2)
+    mutex_m (0.2.0)
     net-imap (0.4.14)
       date
       net-protocol
@@ -185,20 +190,20 @@ GEM
     rackup (2.1.0)
       rack (>= 3)
       webrick (~> 1.8)
-    rails (7.2.0.rc1)
-      actioncable (= 7.2.0.rc1)
-      actionmailbox (= 7.2.0.rc1)
-      actionmailer (= 7.2.0.rc1)
-      actionpack (= 7.2.0.rc1)
-      actiontext (= 7.2.0.rc1)
-      actionview (= 7.2.0.rc1)
-      activejob (= 7.2.0.rc1)
-      activemodel (= 7.2.0.rc1)
-      activerecord (= 7.2.0.rc1)
-      activestorage (= 7.2.0.rc1)
-      activesupport (= 7.2.0.rc1)
+    rails (7.1.3.4)
+      actioncable (= 7.1.3.4)
+      actionmailbox (= 7.1.3.4)
+      actionmailer (= 7.1.3.4)
+      actionpack (= 7.1.3.4)
+      actiontext (= 7.1.3.4)
+      actionview (= 7.1.3.4)
+      activejob (= 7.1.3.4)
+      activemodel (= 7.1.3.4)
+      activerecord (= 7.1.3.4)
+      activestorage (= 7.1.3.4)
+      activesupport (= 7.1.3.4)
       bundler (>= 1.15.0)
-      railties (= 7.2.0.rc1)
+      railties (= 7.1.3.4)
     rails-dom-testing (2.2.0)
       activesupport (>= 5.0.0)
       minitest
@@ -206,10 +211,10 @@ GEM
     rails-html-sanitizer (1.6.0)
       loofah (~> 2.21)
       nokogiri (~> 1.14)
-    railties (7.2.0.rc1)
-      actionpack (= 7.2.0.rc1)
-      activesupport (= 7.2.0.rc1)
-      irb (~> 1.13)
+    railties (7.1.3.4)
+      actionpack (= 7.1.3.4)
+      activesupport (= 7.1.3.4)
+      irb
       rackup (>= 1.0.0)
       rake (>= 12.2)
       thor (~> 1.0, >= 1.2.2)
@@ -226,7 +231,6 @@ GEM
       ffi (~> 1.12)
       logger
     rubyzip (2.3.2)
-    securerandom (0.3.1)
     selenium-webdriver (4.23.0)
       base64 (~> 0.2)
       logger (~> 1.4)
@@ -249,7 +253,6 @@ GEM
       railties (>= 6.0.0)
     tzinfo (2.0.6)
       concurrent-ruby (~> 1.0)
-    useragent (0.16.10)
     web-console (4.2.1)
       actionview (>= 6.0.0)
       activemodel (>= 6.0.0)
@@ -281,7 +284,7 @@ DEPENDENCIES
   pg
   propshaft
   puma
-  rails (~> 7.2.0.rc1)
+  rails (~> 7.1)
   selenium-webdriver
   solid_cache
   stimulus-rails

bin/brakeman

@@ -1,7 +0,0 @@
-#!/usr/bin/env ruby
-require "rubygems"
-require "bundler/setup"
-
-ARGV.unshift("--ensure-latest")
-
-load Gem.bin_path("brakeman", "brakeman")

bin/rubocop

@@ -1,8 +0,0 @@
-#!/usr/bin/env ruby
-require "rubygems"
-require "bundler/setup"
-
-# explicit rubocop config increases performance slightly while avoiding config confusion.
-ARGV.unshift("--config", File.expand_path("../.rubocop.yml", __dir__))
-
-load Gem.bin_path("rubocop", "rubocop")

bin/setup

@@ -12,9 +12,6 @@ def setup
 
   log "Loading fixtures…"
   system!("bin/rails db:fixtures:load")
-
-  log "Removing old logs and temp files…"
-  system!("bin/rails log:clear tmp:clear")
 end
 
 def log(message)

config/application.rb

@@ -9,7 +9,7 @@ Bundler.require(*Rails.groups)
 
 module Soc
   class Application < Rails::Application
-    config.load_defaults 7.2
+    config.load_defaults 7.1
 
     config.time_zone = "London"
     config.autoload_lib(ignore: %w(assets tasks))

config/environments/development.rb

@@ -51,5 +51,4 @@ Rails.application.configure do
     port: 1025,
   }
   config.action_controller.raise_on_missing_callback_actions = true
-  config.active_job.verbose_enqueue_logs = true
 end

config/environments/production.rb

@@ -4,7 +4,7 @@ Rails.application.configure do
   # Settings specified here will take precedence over those in config/application.rb.
 
   # Code is not reloaded between requests.
-  config.enable_reloading = false
+  config.cache_classes = true
 
   # Eager load code on boot. This eager loads most of Rails and
   # your application in memory, allowing both threaded web servers
@@ -48,6 +48,13 @@ Rails.application.configure do
   config.force_ssl = false
   config.assume_ssl = true
 
+  # Include generic and useful information about system operation, but avoid logging too much
+  # information to avoid inadvertent exposure of personally identifiable information (PII).
+  config.log_level = :info
+
+  # Prepend all log lines with the following tags.
+  config.log_tags = [ :request_id ]
+
   # Use a different cache store in production.
   config.cache_store = :solid_cache_store
 
@@ -68,12 +75,18 @@ Rails.application.configure do
   # Don't log any deprecations.
   config.active_support.report_deprecations = false
 
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
   # Use a different logger for distributed setups.
-  config.logger = ActiveSupport::Logger.new(STDOUT)
-    .tap  { |logger| logger.formatter = ::Logger::Formatter.new }
-    .then { |logger| ActiveSupport::TaggedLogging.new(logger) }
-  config.log_level = ENV.fetch("RAILS_LOG_LEVEL") { :info }
-  config.log_tags = [ :request_id ]
+  # require "syslog/logger"
+  # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new "app-name")
+
+  if ENV["RAILS_LOG_TO_STDOUT"].present?
+    logger           = ActiveSupport::Logger.new(STDOUT)
+    logger.formatter = config.log_formatter
+    config.logger    = ActiveSupport::TaggedLogging.new(logger)
+  end
 
   # Do not dump schema after migrations.
   config.active_record.dump_schema_after_migration = false

config/environments/test.rb

@@ -27,7 +27,8 @@ Rails.application.configure do
   config.action_controller.perform_caching = false
   config.cache_store = :null_store
 
-  config.action_dispatch.show_exceptions = :rescuable
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
 
   # Disable request forgery protection in test environment.
   config.action_controller.allow_forgery_protection = false
@@ -54,8 +55,6 @@ Rails.application.configure do
   # Raises error for missing translations.
   config.i18n.raise_on_missing_translations = true
 
-  config.action_controller.raise_on_missing_callback_actions = true
-
   # Annotate rendered view with file names.
   # config.action_view.annotate_rendered_view_with_filenames = true
 end

config/initializers/assets.rb

@@ -5,3 +5,8 @@ Rails.application.config.assets.version = "1.0"
 
 # Add additional assets to the asset load path.
 # Rails.application.config.assets.paths << Emoji.images_path
+
+# Precompile additional assets.
+# application.js, application.css, and all non-JS/CSS in the app/assets
+# folder are already added.
+# Rails.application.config.assets.precompile += %w( admin.js admin.css )

config/initializers/filter_parameter_logging.rb

@@ -1,8 +1,8 @@
 # Be sure to restart your server when you modify this file.
 
-# Configure parameters to be partially matched (e.g. passw matches password) and filtered from the log file.
-# Use this to limit dissemination of sensitive information.
+# Configure parameters to be partially matched (e.g. passw matches password) and filtered from the log file. 
+# Use this to limit dissemination of sensitive information. 
 # See the ActiveSupport::ParameterFilter documentation for supported notations and behaviors.
 Rails.application.config.filter_parameters += [
-  :passw, :email, :secret, :token, :_key, :crypt, :salt, :certificate, :otp, :ssn
+  :passw, :secret, :token, :_key, :crypt, :salt, :certificate, :otp, :ssn
 ]

config/initializers/new_framework_defaults_7_2.rb

@@ -1,70 +0,0 @@
-# Be sure to restart your server when you modify this file.
-#
-# This file eases your Rails 7.2 framework defaults upgrade.
-#
-# Uncomment each configuration one by one to switch to the new default.
-# Once your application is ready to run with all new defaults, you can remove
-# this file and set the `config.load_defaults` to `7.2`.
-#
-# Read the Guide for Upgrading Ruby on Rails for more info on each option.
-# https://guides.rubyonrails.org/upgrading_ruby_on_rails.html
-
-###
-# Controls whether Active Job's `#perform_later` and similar methods automatically defer
-# the job queuing to after the current Active Record transaction is committed.
-#
-# Example:
-#   Topic.transaction do
-#     topic = Topic.create(...)
-#     NewTopicNotificationJob.perform_later(topic)
-#   end
-#
-# In this example, if the configuration is set to `:never`, the job will
-# be enqueued immediately, even though the `Topic` hasn't been committed yet.
-# Because of this, if the job is picked up almost immediately, or if the
-# transaction doesn't succeed for some reason, the job will fail to find this
-# topic in the database.
-#
-# If `enqueue_after_transaction_commit` is set to `:default`, the queue adapter
-# will define the behaviour.
-#
-# Note: Active Job backends can disable this feature. This is generally done by
-# backends that use the same database as Active Record as a queue, hence they
-# don't need this feature.
-#++
-# Rails.application.config.active_job.enqueue_after_transaction_commit = :default
-
-###
-# Adds image/webp to the list of content types Active Storage considers as an image
-# Prevents automatic conversion to a fallback PNG, and assumes clients support WebP, as they support gif, jpeg, and png.
-# This is possible due to broad browser support for WebP, but older browsers and email clients may still not support
-# WebP. Requires imagemagick/libvips built with WebP support.
-#++
-# Rails.application.config.active_storage.web_image_content_types = %w[image/png image/jpeg image/gif image/webp]
-
-###
-# Enable validation of migration timestamps. When set, an ActiveRecord::InvalidMigrationTimestampError
-# will be raised if the timestamp prefix for a migration is more than a day ahead of the timestamp
-# associated with the current time. This is done to prevent forward-dating of migration files, which can
-# impact migration generation and other migration commands.
-#
-# Applications with existing timestamped migrations that do not adhere to the
-# expected format can disable validation by setting this config to `false`.
-#++
-# Rails.application.config.active_record.validate_migration_timestamps = true
-
-###
-# Controls whether the PostgresqlAdapter should decode dates automatically with manual queries.
-#
-# Example:
-#   ActiveRecord::ConnectionAdapters::PostgreSQLAdapter.select_value("select '2024-01-01'::date") #=> Date
-#
-# This query used to return a `String`.
-#++
-# Rails.application.config.active_record.postgresql_adapter_decode_dates = true
-
-###
-# Enables YJIT as of Ruby 3.3, to bring sizeable performance improvements. If you are
-# deploying to a memory constrained environment you may want to set this to `false`.
-#++
-# Rails.application.config.yjit = true

config/puma.rb

@@ -1,54 +1,43 @@
-# This configuration file will be evaluated by Puma. The top-level methods that
-# are invoked here are part of Puma's configuration DSL. For more information
-# about methods provided by the DSL, see https://puma.io/puma/Puma/DSL.html.
-
-# Puma starts a configurable number of processes (workers) and each process
-# serves each request in a thread from an internal thread pool.
+# Puma can serve each request in a thread from an internal thread pool.
+# The `threads` method setting takes two numbers: a minimum and maximum.
+# Any libraries that use thread pools should be configured to match
+# the maximum value specified for Puma. Default is set to 5 threads for minimum
+# and maximum; this matches the default thread size of Active Record.
 #
-# The ideal number of threads per worker depends both on how much time the
-# application spends waiting for IO operations and on how much you wish to
-# to prioritize throughput over latency.
-#
-# As a rule of thumb, increasing the number of threads will increase how much
-# traffic a given process can handle (throughput), but due to CRuby's
-# Global VM Lock (GVL) it has diminishing returns and will degrade the
-# response time (latency) of the application.
-#
-# The default is set to 3 threads as it's deemed a decent compromise between
-# throughput and latency for the average Rails application.
-#
-# Any libraries that use a connection pool or another resource pool should
-# be configured to provide at least as many connections as the number of
-# threads. This includes Active Record's `pool` parameter in `database.yml`.
-threads_count = ENV.fetch("RAILS_MAX_THREADS", 3)
-threads threads_count, threads_count
+max_threads_count = ENV.fetch("RAILS_MAX_THREADS") { 5 }
+min_threads_count = ENV.fetch("RAILS_MIN_THREADS") { max_threads_count }
+threads min_threads_count, max_threads_count
 
-# Specifies the `environment` that Puma will run in.
-rails_env = ENV.fetch("RAILS_ENV", "development")
-environment rails_env
-
-case rails_env
-when "production"
-  # If you are running more than 1 thread per process, the workers count
-  # should be equal to the number of processors (CPU cores) in production.
-  #
-  # Automatically detect the number of available processors in production.
-  require "concurrent-ruby"
-  workers_count = Integer(ENV.fetch("WEB_CONCURRENCY") { Concurrent.available_processor_count })
-  workers workers_count if workers_count > 1
-
-  preload_app!
-when "development"
-  # Specifies a very generous `worker_timeout` so that the worker
-  # isn't killed by Puma when suspended by a debugger.
-  worker_timeout 3600
-end
+# Specifies the `worker_timeout` threshold that Puma will use to wait before
+# terminating a worker in development environments.
+#
+worker_timeout 3600 if ENV.fetch("RAILS_ENV", "development") == "development"
 
 # Specifies the `port` that Puma will listen on to receive requests; default is 3000.
-port ENV.fetch("PORT", 3000)
+#
+port ENV.fetch("PORT") { 3000 }
+
+# Specifies the `environment` that Puma will run in.
+#
+environment ENV.fetch("RAILS_ENV") { "development" }
+
+# Specifies the `pidfile` that Puma will use.
+pidfile ENV.fetch("PIDFILE") { "tmp/pids/server.pid" }
+
+# Specifies the number of `workers` to boot in clustered mode.
+# Workers are forked web server processes. If using threads and workers together
+# the concurrency of the application would be max `threads` * `workers`.
+# Workers do not work on JRuby or Windows (both of which do not support
+# processes).
+#
+# workers ENV.fetch("WEB_CONCURRENCY") { 2 }
+
+# Use the `preload_app!` method when specifying a `workers` number.
+# This directive tells Puma to first boot the application and load code
+# before forking the application. This takes advantage of Copy On Write
+# process behavior so workers use less memory.
+#
+# preload_app!
 
 # Allow puma to be restarted by `bin/rails restart` command.
 plugin :tmp_restart
-
-# Only use a pidfile when requested
-pidfile ENV["PIDFILE"] if ENV["PIDFILE"]

public/406-unsupported-browser.html

@@ -1,66 +0,0 @@
-<!DOCTYPE html>
-<html>
-<head>
-  <title>Your browser is not supported (406)</title>
-  <meta name="viewport" content="width=device-width,initial-scale=1">
-  <style>
-  .rails-default-error-page {
-    background-color: #EFEFEF;
-    color: #2E2F30;
-    text-align: center;
-    font-family: arial, sans-serif;
-    margin: 0;
-  }
-
-  .rails-default-error-page div.dialog {
-    width: 95%;
-    max-width: 33em;
-    margin: 4em auto 0;
-  }
-
-  .rails-default-error-page div.dialog > div {
-    border: 1px solid #CCC;
-    border-right-color: #999;
-    border-left-color: #999;
-    border-bottom-color: #BBB;
-    border-top: #B00100 solid 4px;
-    border-top-left-radius: 9px;
-    border-top-right-radius: 9px;
-    background-color: white;
-    padding: 7px 12% 0;
-    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
-  }
-
-  .rails-default-error-page h1 {
-    font-size: 100%;
-    color: #730E15;
-    line-height: 1.5em;
-  }
-
-  .rails-default-error-page div.dialog > p {
-    margin: 0 0 1em;
-    padding: 1em;
-    background-color: #F7F7F7;
-    border: 1px solid #CCC;
-    border-right-color: #999;
-    border-left-color: #999;
-    border-bottom-color: #999;
-    border-bottom-left-radius: 4px;
-    border-bottom-right-radius: 4px;
-    border-top-color: #DADADA;
-    color: #666;
-    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
-  }
-  </style>
-</head>
-
-<body class="rails-default-error-page">
-  <!-- This file lives in public/406-unsupported-browser.html -->
-  <div class="dialog">
-    <div>
-      <h1>Your browser is not supported.</h1>
-      <p>Please upgrade your browser to continue.</p>
-    </div>
-  </div>
-</body>
-</html>

public/icon.svg

@@ -1,3 +0,0 @@
-<svg width="100" height="100" xmlns="http://www.w3.org/2000/svg">
-  <rect width="100%" height="100%" fill="red"/>
-</svg>